AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'LDAP Numeric Attribute'
ldap-numeric-attr
[LDAPNumericAttributes]
Defines up to five LDAP Attributes (separated by
commas) for which the device employs LDAP query
searches in the AD for numbers that may have
characters between the digits.
For more information, see Enabling LDAP Searches
for Numbers with Characters.
'LDAP OCS Number Attribute Name'
configure voip > sip-
definition settings > ldap-
ocs-nm-attr
[MSLDAPOCSNumAttributeName]
Defines the name of the attribute that represents the
user's Skype for Business number in the Microsoft
AD database.
The valid value is a string of up to 49 characters.
The default is "msRTCSIP-Line".
LDAP PBX Number Attribute Name
configure voip > sip-
definition settings > ldap-
pbx-nm-attr
[MSLDAPPBXNumAttributeName]
Defines the name of the attribute that represents the
user PBX number in the Microsoft AD database.
The valid value is a string of up to 49 characters.
The default is "telephoneNumber".
LDAP MOBILE Number Attribute Name
configure voip > sip-
definition settings > ldap-
mobile-nm-attr
[MSLDAPMobileNumAttributeName]
Defines the name of the attribute that represents the
user Mobile number in the Microsoft AD database.
The valid value is a string of up to 49 characters.
The default is "mobile".
LDAP PRIVATE Number Attribute
Name
configure voip > sip-
definition settings > ldap-
private-nm-attr
[MSLDAPPrivateNumAttributeName]
Defines the name of the attribute that represents the
user's private number in the AD. If this value equals
the value of the MSLDAPPrimaryKey or
MSLDAPSecondaryKey parameter, then the device
queries the AD for the destination number in this
private attribute name; otherwise, the parameter is
not used as a search key.
The default is "msRTCSIP-PrivateLine".
'LDAP DISPLAY Name Attribute
Name'
configure voip > sip-
definition settings > ldap-
display-nm-attr
[MSLDAPDisplayNameAttributeName]
Defines the attribute name that represents the
Calling Name in the AD for LDAP queries based on
calling number.
The valid value is a string of up to 49 characters.
The default is "displayName".
LDAP Primary Key
configure voip > sip-
definition settings > ldap-
primary-key
[MSLDAPPrimaryKey]
Defines the name of the attribute used as a query
search key for the destination number in the AD.
This is used instead of the "PBX" attribute name
(configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
LDAP Secondary Key Defines the name of the attribute used as the
second query search key for the destination number
in the AD, if the primary search key or PBX search
is not found.
- 1369 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English