AudioCodes E-SBC - Page 15

Notice
Mediant 1000 Gateway & E-SBC | User's Manual
LTRT Description
■ Updated Parameters: WebUsers_Password (\); WebUsers_
SSHPublicKey; InterfaceTable_PrefixLength (31); InterfaceTable_
Gateway; IPGroup_AuthenticationMode; IPGroup_Username;
IPGroup_Password; ProxySet_ProxyRedundancyMode (note);
CallSetupRules_QueryType (ENUM address); CallSetupRules_
QueryTarget (ENUM); IpProfile_SBCRemoteReferBehavior;
IP2IPRouting_DestType (note); SSHAdminKey (removed);
SSHRequirePublicKey; BriTEIConfigP2P_x; BriLayer2Mode;
BriTEIConfigP2MP_x; BriTEIAssignTrigger_x; BriTEIRemoveTrigger_
x; DisableICMPUnreachable; IpProfile_SBCISUPBodyHandling (new
value); LogoWidth (removed); GWInboundManipulationSet;
GWOutboundManipulationSet
■ New Parameters: StaticNatIP; ISDNIgnore18xWithoutSDP;
ISDNSendProgressForTE; ForceGenerateToTag; LdapConfiguration_
NoOpTimeout
27066 Updated for software update Version 7.20A.250.
■ Updated sections: Alternative Routing Based on SIP Responses (806
updated); CDR Field Description (SIP Local/Remote Tag); CLI-Based
Management (user levels); Configuring Charge Codes (CLI command);
Accessing Web (Log In button name); Configuring Management User
Accounts (user level descriptions); Configuring Media (SRTP) Security
(AES-256); Configuring Media Realms (max); Configuring SIP
Recording Rules (note for SRTP-SRTP recording); Configuring the
Internal DNS Table (note); Configuring the Internal SRV Table (max);
Configuring Default DNS Servers; Configuring the Trunk Group
Settings Table (max); Event Detection and Notification using X-Detect
Header (note re CPT); HTTP Proxy Parameters (CLI); Prerecorded
Tones File ("acUserDefine" and description); Restoring Factory
Defaults through Web Interface (check box name); Three-Way
Conferencing (3WayConfNoneAllocateablePorts added); Viewing
Device Information (device uptime format);WebRTC (sessions);
Configuring Trunk Groups (max); Configuring HTTP Directive Sets
(values changed of limit_conn and limit_rate); File Location for
Automatic Update (username-password); Configuring Source-
Destination Number Manipulation Rules (TON-NPI)
■ New sections: onfiguring a Public IP Address for NGINX NAT
Traversal; Configuring SIP Response Codes to Exclude from IDS;
Configuring the Best Impedance Level; Debugging PSTN Calls through
CLI; Displaying Line Impedance Test Results; FXO Line Impedance
Matching Testing; Running the Line Impedance Test
- xv -