CHAPTER16 Services
Mediant 1000 Gateway & E-SBC | User's Manual
DHCP Option Code DHCP Option Name
Option 42 Network Time Protocol Server
Option 2 Time Offset
Option 66 TFTP Server Name
Option 67 Boot file Name
Option 120 SIP Server
Once you have configured the DHCP server, you can configure the following:
â– DHCP Vendor Class Identifier names (DHCP Option 60) - see Configuring the Vendor Class
Identifier
â– Additional DHCP Options - see Configuring Additional DHCP Options
â– Static IP addresses for DHCP clients - see Configuring Static IP Addresses for DHCP Clients
If you configure additional DHCP Options in the DHCP Option table, they override the
default ones, which are configured in the DHCP Servers table. For example, if you
configure Option 67 in the DHCP Option table, the device uses the value configured in
the DHCP Option table instead of the value configured in the DHCP Servers table.
To view and delete currently serviced DHCP clients, see Viewing and Deleting DHCP Clients.
The following procedure describes how to configure the DHCP server through the Web interface.
You can also configure it through ini file [DhcpServer] or CLI (configure network > dhcp-
server server <index>).
➢ To configure the device's DHCP server:
1. Open the DHCP Servers page (Setup menu > IP Network tab > Advanced folder > DHCP
Severs).
2. Click New; the following dialog box appears:
- 190 -