EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
CHAPTER16 Services
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'DNS Server 2'
dns-server-2
[DhcpServer_
DNSServer2]
Defines the IP address (IPv4) of the secondary DNS server that the
DHCP server assigns to the DHCP client. The value is sent in
DHCP Option 6 (Domain Name Server).
The default value is 0.0.0.0.
NetBIOS
'NetBIOS Name
Server'
netbios-server
[DhcpServer_
NetbiosNameServer]
Defines the IP address (IPv4) of the NetBIOS WINS server that is
available to a Microsoft DHCP client. The value is sent in DHCP
Option 44 (NetBIOS Name Server).
The default value is 0.0.0.0.
'NetBIOS Node Type'
netbios-node-
type
[DhcpServer_
NetbiosNodeType]
Defines the node type of the NetBIOS WINS server for a Microsoft
DHCP client. The value is sent in DHCP Option 46 (NetBIOS Node
Type).
â–  [0] Broadcast (default)
â–  [1] peer-to-peer
â–  [4] Mixed
â–  [8] Hybrid
Time and Date
'NTP Server 1'
ntp-server-1
[DhcpServer_
NTPServer1]
Defines the IP address (IPv4) of the primary NTP server that the
DHCP server assigns to the DHCP client. The value is sent in
DHCP Option 42 (Network Time Protocol Server).
The default value is 0.0.0.0.
'NTP Server 2'
ntp-server-2
[DhcpServer_
NTPServer2]
Defines the IP address (IPv4) of the secondary NTP server that the
DHCP server assigns to the DHCP client. The value is sent in
DHCP Option 42 (Network Time Protocol Server).
The default value is 0.0.0.0.
'Time Offset'
time-offset
[DhcpServer_
TimeOffset]
Defines the Greenwich Mean Time (GMT) offset (in seconds) that the
DHCP server assigns to the DHCP client. The value is sent in
DHCP Option 2 (Time Offset).
The valid range is -43200 to 43200. The default is 0.
Boot File
'TFTP Server Name'
tftp-server-name
[DhcpServer_
TftpServer]
Defines the IP address or name of the TFTP server that the DHCP
server assigns to the DHCP client. The TFTP server typically stores
the boot file image, defined in the 'Boot file name' parameter (see
below). The value is sent in DHCP Option 66 (TFTP Server Name).
The valid value is a string of up to 80 characters. By default, no value
is defined.
- 192 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals