Content
Mediant 1000 Gateway & E-SBC | User's Manual
Mapping NPI/TON to SIP Phone-Context 629
Configuring Release Cause Mapping 631
SIP-to-ISDN Release Cause Mapping 631
Configuring SIP-to-ISDN Release Cause Mapping 631
Fixed Mapping of SIP Response to ISDN Release Reason 632
ISDN-to-SIP Release Cause Mapping 634
Configuring ISDN-to-SIP Release Cause Mapping 634
Fixed Mapping of ISDN Release Reason to SIP Response 635
Configuring ISDN-to-ISDN Release Cause Mapping 639
SIP Reason Header for Release Cause 640
Mapping PSTN Release Cause to SIP Response for Analog Interfaces 641
Numbering Plans and Type of Number 641
27 Configuring DTMF and Dialing 643
Dialing Plan Features 643
Digit Mapping 643
Dial Plan Rules 644
Interworking Keypad DTMFs for SIP-to-ISDN Calls 644
Configuring Hook Flash 645
28 Configuring Supplementary Services 646
Call Hold and Retrieve 646
Configuring MoH from External Audio Source 648
Call Pickup 650
BRI Suspend and Resume 651
Consultation Feature 651
Call Transfer 651
Consultation Call Transfer 652
Consultation Transfer for QSIG Path Replacement 653
Blind Call Transfer 653
Call Forward 654
Enabling Call Forwarding 654
Call Forward Reminder Ring 655
Call Forward Reminder (Off-Hook) Special Dial Tone 656
Call Forward Reminder Dial Tone (Off-Hook) upon Spanish SIP Alert-Info 657
Remote Handling of BRI Call Forwarding 657
Local Handling of BRI Call Forwarding 659
Enabling Call Waiting 660
Message Waiting Indication 661
Caller ID 662
Enabling Caller ID Generation and Detection on Tel Side 663
Debugging a Caller ID Detection on FXO 663
Caller ID on the IP Side 664
Three-Way Conferencing 665
Emergency E911 Phone Number Services 668
FXS Device Emulating PSAP using DID Loop-Start Lines 668
- xxviii -
To Next Page
Loading...
Need help?
General
