CHAPTER19 Coders and Profiles
Mediant 1000 Gateway & E-SBC | User's Manual
3. Configure a name for the Allowed Video Coders Group according to the parameters described
in the table below.
4. Click Apply.
5. Select the new row that you configured, and then click the Allowed Video Coders link located
below the table; the Allowed Video Coders table opens.
6. Click New; the following dialog box appears:
7. Configure coders for the Allowed Video Coders Group according to the parameters described in
the table below.
8. Click Apply.
Table 19-4: Allowed Video Coders Groups and Allowed Video Coders Tables Parameter Descriptions
Parameter Description
Allowed Video Coders Groups Table
'Index'
allowed-video-coders-
groups <index>
[AllowedVideoCodersGroups_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique
index.
'Name'
coders-group-name
[AllowedVideoCodersGroups_
Name]
Defines a descriptive name, which is used when
associating the row in other tables.
The valid value is a string of up to 40 characters.
Note:
â– Each row must be configured with a unique name.
â– The parameter value cannot contain a forward slash
(/).
Allowed Video Coders Table
'Index' Defines an index number for the new table row.
- 394 -
To Next Page
Loading...
Need help?
General
