AudioCodes E-SBC - Page 6

Notice
Mediant 1000 Gateway & E-SBC | User's Manual
LTRT Description
■ Updated parameters: TLSContexts_ServerCipherString; TLSContexts_
ClientCipherString; NATTranslation_SourceStartPort; NATTranslation_
SourceEndPort; NATTranslation_TargetStartPort; NATTranslation_
TargetEndPort; SNMPSysOid; SNMPTrapEnterpriseOid;
EnableCoreDump (typo); HTTPSCipherString (removed);
SSHAdminKey; SessionExpiresDisconnectTime;
ISDNJapanNTTTimerT3JA; BrokenConnectionEventTimeout;
RADIUSRetransmission (default); RadiusTO (default).
■ New parameters: WebUsers_SSHPublicKey; TLSContexts_
DTLSVersion; TLSContexts_DHKeySize; ProxySet_
SuccessDetectionRetries; ProxySet_SuccessDetectionInterval;
ProxySet_FailureDetectionRetransmissions; ProxySet_
MinActiveServersLB; WebUsers; WebFaviconFileUrl;
ISDNSuppServ_CFB2PhoneNumber; ISDNSuppServ_
CFNR2PhoneNumber; ISDNSuppServ_CFU2PhoneNumber;
ISDNSuppServ_NoReplyTime; AUPDStartupScriptURL;
BRICallForwardHandling.
27050 ■ Updated sections: Configuring VoIP LAN Interface for OAMP
(Web/CLI); Configuring Management User Accounts (typo); Enabling
SNMP; Configuring Physical Ethernet Ports (ports); Configuring
Ethernet Port Groups (0/3); Configuring IP Network Interfaces;
Configuring LDAP Servers (max. and cache); Configuring Call Setup
Rules; Alternative Routing Based on IP Connectivity (Busy Out);
Alternative Routing Based on SIP Responses (Busy Out); Fixed
Mapping of SIP Response to ISDN Release Reason; Fixed Mapping of
ISDN Release Reason to SIP Response; Configuring SBC IP-to-IP
Routing (note); Configuring SIP Response Codes for Alternative
Routing Reasons; Configuring Charge Codes; SBC Wizard (screens);
Auxiliary Files (SBC Wizard); Viewing IP Connectivity (typo); Creating
Core Dump and Debug Files upon Device Crash (reset); Technical
Specifications (Eth interfaces)
■ New sections: Debugging Remote HTTP Services
- vi -