AudioCodes E-SBC User Manual

CHAPTER26 Manipulation
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
Note: The parameter is applicable only to the Calling Name
Manipulation for IP-to-Tel Calls table.
'Source Host Pattern'
src-host-pattern
[_SrcHost]
Defines the URI host part of the incoming SIP INVITE message
in the From header.
You can use special patterns (notations) to denote the host part.
For example, if you want to match this rule to host parts that end
(suffix) in ".com", then configure this parameter to "(.com)". For
available patterns, see Dialing Plan Notation for Routing and
Manipulation Tables.
The default value is the asterisk (*) symbol, meaning any source
host part.
Note:
■ The parameter is applicable only to the Calling Name
Manipulation for IP-to-Tel Calls table.
■ If the P-Asserted-Identity header is present in the incoming
INVITE message, the value of the parameter is compared to
the P-Asserted-Identity URI host name (instead of the From
header).
'Destination Host Pattern'
dst-host-pattern
[_DestHost]
Defines the Request-URI host part of the incoming SIP INVITE
message.
You can use special patterns (notations) to denote the host part.
For example, if you want to match this rule to host parts that end
(suffix) in ".com", then configure this parameter to "(.com)". For
available patterns, see Dialing Plan Notation for Routing and
Manipulation Tables.
The default value is the asterisk (*) symbol, meaning any
destination host part.
Note: The parameter is applicable only to the Calling Name
Manipulation for IP-to-Tel Calls table.
Action
'Stripped Characters From
Left'
remove-from-left
[_RemoveFromLeft]
Defines the number of characters to remove from the left of the
calling name.
For example, if you enter 3 and the calling name is
"company:john", the new calling name is "pany:john".
'Stripped Characters From
Right'
remove-from-right
[_RemoveFromRight]
Defines the number of characters to remove from the right of the
calling name.
For example, if you enter 3 and the calling name is
"company:name", the new name is "company:n".
'Number of Characters to
Leave'
num-of-digits-to-
leave
[LeaveFromRight]
Defines the number of characters that you want to keep from the
right of the calling name.
For example, if you enter 4 and the calling name is
"company:name", the new name is "name".
- 622 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English