AudioCodes E-SBC - Page 668

CHAPTER26 Manipulation
Mediant 1000 Gateway & E-SBC | User's Manual
Table 26-7: Phone Contexts table Parameter Description
Parameter Description
'Index'
[PhoneContext_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'NPI'
npi
[PhoneContext_
Npi]
Defines the Number Plan Indicator (NPI).
■ [0] Unknown (default)
■ [1] E.164 Public
■ [9] Private
For a detailed list of the available NPI/TON values, see Numbering Plans
and Type of Number.
'TON'
ton
[PhoneContext_
Ton]
Defines the Type of Number (TON).
■ [0] Unknown
■ [1] International-Level2 Regional
■ [2] National-Level1 Regional
■ [3] Network-PSTN Specific
■ [4] Subscriber-Level0 Regional
■ [6] Abbreviated
The applicable values depend on the NPI value:
■ If you select Unknown as NPI, you can select Unknown.
■ If you select Private as NPI, you can select one of the following:
✔ [0] Unknown
✔ [1] International-Level2 Regional
✔ [2] National-Level1 Regional
✔ [3] Network-PSTN Specific
✔ [4] Subscriber-Level0 Regional
■ If you select E.164 Public as NPI, you can select one of the
following:
✔ [0] Unknown
✔ [1] International-Level2 Regional
✔ [2] National-Level1 Regional
✔ [3] Network-PSTN Specific
✔ [4] Subscriber-Level0 Regional
✔ [6] Abbreviated
'SIP Phone-
Context'
context
[PhoneContext_
Context]
Defines the SIP 'phone-context' URI parameter.
- 630 -