EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #728 background imageLoading...
Page #728 background image
CHAPTER28 Configuring Supplementary Services
Mediant 1000 Gateway & E-SBC | User's Manual
2. Under the General group, configure the following:
'Line Transfer Mode' (LineTransferMode): Defines the call transfer method used by the
device.
'Voice Mail Interface' (VoiceMailInterface): Enables the device's Voice Mail feature and
defines the communication method between the device and PBX.
3. Under the Message Waiting Indicator group, configure the digit codes used by the device for
relaying message waiting indication information to the PBX:
'MWI Off Digit Pattern' (MWIOffCode): Defines the digit code indicating no messages
waiting for a specific extension.
'MWI On Digit Pattern' (MWIOnCode): Defines the digit code indicating messages waiting
for a specific extension.
'MWI Suffix Pattern' (MWISuffixCode): Defines the digit code used as a suffix for 'MWI
On Digit Pattern' and 'MWI Off Digit Pattern'.
'MWI Source Number' (MWISourceNumber): Defines the calling party's phone number in
the Q.931 MWI Setup message to PSTN.
4. Under the SMDI group, configure Simplified Message Desk Interface (SMDI):
'Enable SMDI' (SMDI): Enables SMDI interface on the device.
'SMDI Timeout' (SMDITimeOut): Defines the time (in msec) that the device waits for an
SMDI Call Status message before or after a Setup message is received.
5. Under the Digit Patterns group, configure the digit patterns used by the PBX to indicate various
services:
'Forward on Busy Digit Pattern Internal' (DigitPatternForwardOnBusy): Defines the digit
pattern to indicate 'call forward on busy' when the original call is received from an internal
extension.
'Forward on No Answer Digit Pattern Internal' (DigitPatternForwardOnNoAnswer):
Defines the digit pattern to indicate 'call forward on no answer' when the original call is
received from an internal extension.
'Forward on Do Not Disturb Digit Pattern Internal' (DigitPatternForwardOnDND): Defines
the digit pattern to indicate 'call forward on do not disturb' when the original call is received
from an internal extension.
- 690 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals