AudioCodes E-SBC User Manual

CHAPTER34 Routing SBC
Mediant 1000 Gateway & E-SBC | User's Manual
The following procedure describes how to configure Classification rules through the Web interface.
You can also configure it through ini file [Classification] or CLI (configure voip > sbc
classification).
➢ To configure a Classification rule:
1. Open the Classification table (Setup menu > Signaling & Media tab > SBC folder >
Classification Table).
2. Click New; the following dialog box appears:
3. Configure the Classification rule according to the parameters described in the table below.
- 764 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English