AudioCodes E-SBC User Manual

CHAPTER35 SBC Manipulations
Mediant 1000 Gateway & E-SBC | User's Manual
'Request Type'
request-type
[IPInboundManipulation_
RequestType]
Defines the SIP request type to which the manipulation rule is
applied.
■ [0] All = (Default) All SIP messages.
■ [1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
■ [2] REGISTER = Only REGISTER messages.
■ [3] SUBSCRIBE = Only SUBSCRIBE messages.
■ [4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.
■ [5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
'Source IP Group'
src-ip-group-name
[IPInboundManipulation_
SrcIpGroupName]
Defines the IP Group from where the incoming INVITE is
received.
The default is Any (i.e., any IP Group).
'Source Username
Pattern'
src-user-name-
pattern
[IPInboundManipulation_
SrcUsernamePrefix]
Defines the source SIP URI user name (usually in the From
header).
The default is the asterisk (*) symbol (i.e., any source user
name). You can use special pattern notations to denote the user
part. For available notations, see Dialing Plan Notation for
Routing and Manipulation.
'Source Host'
src-host
[IPInboundManipulation_
SrcHost]
Defines the source SIP URI host name - full name (usually in the
From header).
The default is the asterisk (*) symbol (i.e., any host name).
'Destination Username
Pattern'
dst-user-name-
pattern
[IPInboundManipulation_
DestUsernamePrefix]
Defines the destination SIP URI user name, typically located in
the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination user
name). You can use special pattern notations to denote the user
part. For available notations, see Dialing Plan Notation for
Routing and Manipulation.
'Destination Host'
dst-host
[IPInboundManipulation_
DestHost]
Defines the destination SIP URI host name - full name, typically
located in the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Operation Rule - Action
'Manipulated Item'
manipulated-uri
[IPInboundManipulation_
ManipulatedURI]
Determines whether the source or destination SIP URI user part
is manipulated.
■ [0] Source = (Default) Manipulation is done on the source
SIP URI user part.
■ [1] Destination = Manipulation is done on the destination SIP
URI user part.
- 808 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English