Avaya Definity SI - Page 1270

Maintenance Object Repair Procedures
555-233-123
10-484 Issue 4 May 2002
NPE Audit Test (#50)
The system updates the network connectivity information for all the NPEs on the
circuit pack through message to the on-board microprocessor. This test is
non-destructive.
Control Channel Loop Around Test (#52)
This non-destructive test queries the circuit pack for its code and vintage. This test
also verifies the circuit pack records.
Table 10-175. TEST #50 NPE Audit Test
Error
Code
Te s t
Result Description/Recommendation
ABORT Could not allocate the necessary system resources to run this
test.
2100 ABORT Could not allocate the necessary system resources to run this
test.
1019 ABORT Test already in progress.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5
times.
PASS Circuit pack NPEs and translation updated.
Continued on next page
Table 10-176. TEST #52 Control Channel Loop Around Test
Error
Code
Te s t
Result Description/Recommendation
ABORT Could not allocate the necessary system resources to run this
test.
FAIL Internal system error
1. Retry the command at 1-minute intervals, up to 5 times.
PASS Successful communication with circuit pack.