Maintenance Object Repair Procedures
555-233-123
10-552 Issue 4 May 2002
Notes:
a. Error Type 1: this error reports the registration status of the endpoint. If call
processing SW claims the endpoint is registered and receives keep-alive
handshakes from the endpoint, the test passes. If keep-alive handshaking
has failed, the test fails. If the user has intentionally un-registered from
Avaya DEFINITY Server, the station is now basically an AWOH station and
is no longer being maintained; no tests run for this station.
b. Error Type 18: this error type is logged when the port/station is busied out
by maintenance personal. Make sure the port/station is released from busy
via the release port/station command (IP terminal only).
c. Error Type 257: this error tracks failures of the signaling path PING test.
The test attempts to send a PING packet to the endpoint IP address, as
reported during registration. The PING packet originates with the C-LAN
board through which the endpoint is registered. If the PING response
packet is received, the test passes. If the PING response packet times out,
the test fails.
Table 10-201. DIG-IP-STN Digital IP Station Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0 0 Any Any test station extension
1 (a) Registration Status Inquiry
(#1372)
WARNING OFF
18 (b) 0 Busyout port or station WARNING OFF release port (or)
station
257 (c) Signaling Path PING Test
(#1373)
WARNING OFF
(d) Digital Terminal Lamp
Update (#16)
WARNING OFF
(e) Digital Terminal Audit
Update (#17)
WARNING OFF
513 (f) Any Station Digital AUDIT Test
(#17)
WARNING OFF test port or station
1281
(g)
Any Station Digital AUDIT Test
(#17)
WARNING OFF test port or station
1537
(h)
40968 WARNING OFF test port or station
2305 (i) Any None
2817 (j) Station Hyperactivity
Continued on next page
To Next Page
Loading...
