Avaya Definity SI - Page 1492

Maintenance Object Repair Procedures
555-233-123
10-706 Issue 4 May 2002
Error Log Entries and Test to Clear Values
Notes:
a. This error indicates that an unexpected hardware reset has occurred on
the Duplication Interface circuit pack. Appropriate action has been taken by
the software to prevent malfunction. However, if this type error occurs with
regular frequency, the DUPINT circuit pack may need to be replaced.
b. There are several possible Aux Data fields for this error, including blank. All
indicate loss of contact with the indicated Duplication Interface circuit
packs.
Table 10-259. Duplication Interface Circuit Pack Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
0
1
1 Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
0 Any Any Any test dup 1C sh r 1
1 Sanity Circuit Test (#273) MAJOR/
WRN
ON test dup 1C l r 1
108 (a) Any None
109 (a) Any None
257 SAT Loop Back Test (#274) MAJOR/
WRN
ON test dup 1C sh r 3
513 SPE A Loop Back Test (#275) MAJOR/
WRN
ON test dup 1C sh r 3
769 SPE B Loop Back Test (#276) MAJOR/
WRN
ON test dup 1C sh r 3
1025 Sanity Maze Test (#277) MAJOR
/WRN
ON test dup 1C sh r 3
1281 (b) Any DUPINT Status Query Test
(#315)
MAJOR/
WRN
ON test dup 1C sh r 6
1537 (c) Any Background Test Query Test
(#271)
MAJOR/
WRN
ON test dup 1C sh r 3
1793 (d) Any MBUS Time-Out Query Test
(#285)
MAJOR/
WRN
ON test dup 1C l r 3