Maintenance Object Repair Procedures
555-233-123
10-758 Issue 4 May 2002
Tone Detector Audit/Update Test (#43)
A Digital Signal Processor sanity audit is performed on the ETR-PT.
Table 10-286. TEST #43 Tone Detector Audit/Update Test
Error
Code
Te s t
Result Description/Recommendation
none ABORT The system was not able to allocate all the resources needed
for this test.
1. Wait 1 minute, and repeat the command a maximum of 5
times.
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT Could not allocate the necessary system resources to run this
test.
1. Retry the command at 1-minute intervals a maximum of 5
times.
Continued on next page
To Next Page
Loading...
