EXP-INTF (Expansion Interface Circuit Pack)
Issue 4 May 2002
10-779555-233-123
Expansion Interface Neighbor Query Test (#237)
The Expansion Interface Neighbor Query Test is a request to an EI circuit pack to
determine if it has established communication with the EI circuit pack on the
opposite end of the fiber.
Table 10-289. TEST #237 EI Neighbor Query Test
Error
Code
Te s t
Result Description/Recommendation
ABORT Internal System Error
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT System resources required to run this test are not available.
Someone may be doing something on this Port Network
Interface.
1. Retry the command at 1-minute intervals a maximum of 3
times.
2027 FAIL The EI circuit pack has contact with the opposite EI circuit pack,
but it is the incorrect EI circuit pack.
1. Check Expansion Interface circuit packs and lightwave
transceivers to verify that they are placed in the correct slots
described above.
2. If working with duplicate Expansion Interface Links, check
for crossed fiber pairs such as 1A01 connected to 2B02 or
1B01 connected to 2A01.
Continued on next page
To Next Page
Loading...
