H323-BCH (H.323 B-Channel)
Issue 4 May 2002
10-871555-233-123
System Technician Commands
The following commands are available to the system technician:
■ busyout port UUCSSpp – on a specific H.323 B-channel, drops any
active call that may exist on that B-channel and effectively reduces the
trunk group capacity by one. No physical piece of hardware is removed
from service.
■ release port UUCSSpp – on a specific H.323 B-channel, increases the
trunk group capacity by one. No physical piece of hardware is actually
added to service.
■ status trunk grp/mbr – use to find the current status of the specific
B-channel. Additional status for an H.323 B-channel shows near and
far-end IP signaling addresses, near and far-end H.245 addresses,
tunneling status, call reference value for an active call and the H.323
conference ID.
■ test port UUCSSpp – this command results in the message No tests
applicable to this object.
To Next Page
Loading...
