H323-SGRP (H.323 Signaling Group)
Issue 4 May 2002
10-879555-233-123
MedPro Status Test (#1392)
This test is non-destructive.
This test determines if at least one media processor port exists that is in service,
and that serves the same region as the CLAN that the signaling group uses. If at
least one exists and is in-service, the test passes; otherwise, the test fails.
Table 10-317. TEST #1392 MedPro Status Test
Error
Code
Test
Result Description/Recommendation
2100 ABORT The necessary system resources to execute the test could not
be allocated.
1. Retry the command at 1-minute intervals a maximum
of 5 times.
2500 ABORT Internal system Error.
1. Retry the command at 1-minute intervals a maximum
of 3 times
FAIL No MEDPRO ports in this region are in-service. All sessions are
down.
1. Execute test sig-group grp# and verify the result of
the H.323 Signaling Group Ping Test (#1387). If the
test continues to fail, escalate the problem. If the test
passes, wait for the sessions to come up.
PASS All sessions on the ethernet link are up.
Continued on next page
To Next Page
Loading...
