INADS (INADS Link)
Issue 4 May 2002
10-915555-233-123
9 0 Internal system error
1. Try the command again at 1-minute intervals up to 5 times.
10 0 There is already a test inads-link command in progress.
1. Wait 10 minutes for the present command to finish.
2. Review the results of the present command by viewing the
Error Log and selecting the category “inads-link.”
11 0 The switch is trying to report alarms to INADS. The test cannot
be run at this time.
1. Wait 10 minutes and retry the command.
Table 10-332. INADS Link Error Log Entries Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
