MEDPRO (Media Processor MAPD Circuit Pack)
Issue 4 May 2002
10-1075555-233-123
PASS The circuit pack initializes correctly.
1. Run the short test sequence.
Any NO
BOARD
This is normal if the test is being done when (a) the board is not
physically in the system or (b) the system is booting up.
Otherwise, there is some inconsistency between the physical
configuration and the data kept in the system.
1. Verify that the board is physically in the system.
2. Verify that the system is not in a stage of booting up.
3. Retry the command at 1-minute intervals for a
maximum of 5 times.
Table 10-400. TEST #53 SAKI Sanity Test — Continued
Error
Code
Test
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
