Maintenance Object Repair Procedures
555-233-123
10-1384 Issue 4 May 2002
PASS MTP detected correct data from the external modem. The
MTP received an OK response after sending the AT
command to the modem.
1. If the system cannot call INADS, or if INADS cannot
contact the system, check with the local Central Office
for problems with the INADS trunk, and verify that the
INADS number is correct. If an external modem is being
used instead of the internal MTP modem, modem
settings may be wrong. Approved external modems
with factory default settings are expected to work if
administered correctly using the change
system-parameters maintenance command.
Table 10-513. TEST #230 External Modem Present Test — Continued
Error Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
