PR-MEM (TN2404/TN790 RISC Memory)
Issue 4 May 2002
10-1405555-233-123
Table 10-524. TEST #86 Text Checksum Test
Error Code
Te s t
Result Description/Recommendation
100 ABORT The test did not complete within the allowable time period.
1. Retry the command.
1029 2014
2015 2016
2017 2018
2020 2022
2024 2025
2051
ABORT Refer to STBY-SPE Maintenance documentation for a
description of these error codes.
2500 ABORT Internal system error
1. Retry the command.
1 - 7 FAIL The system may or may not continue to operate correctly.
The system may fail later when some action requires
access to the corrupted area of the Text.
1. The Flash ROM should be reprogrammed via the
upgrade software command. The memory card
should contain the same vintage software that is
currently in the system. Refer to the “Software
Upgrade” section in this manual.
2. If the test continues to fail, replace the TN2404/TN790
Processor circuit pack and repeat step 1. (Note that if
you replace the Processor circuit pack, you need to
obtain a new license file.)
PASS The checksum is correct.
Continued on next page
To Next Page
Loading...
