SHDW-LNK (Memory Shadowing Link)
Issue 4 May 2002
10-1501555-233-123
2047 FAIL The Standby SPE Maintenance/Tape Processor released the
Standby SPE processor with a request to clear Standby SPE
Memory; Standby SPE Memory was not successfully cleared.
1. Check for Standby SPE Processor errors and alarms. Refer
to PROCR (80286 Processor Circuit Pack) Maintenance
documentation and follow the prescribed procedures.
2. Check for Standby SPE Memory errors and alarms. Refer to
MEM-BD (Memory) Maintenance documentation and follow
the prescribed procedures.
3. If all problems found in Steps 1 and 2 have now been
repaired, proceed with Step 5. If no problems were found in
Steps 1 and 2, proceed with Step 4.
Table 10-572. TEST #318 Shadow Link Test — Continued
Error
Code
Tes t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
