Maintenance Object Repair Procedures
555-233-123
10-1650 Issue 4 May 2002
68 FAIL The update files and load vintages are different in both SPEs.
The Standby SPE has the most current update file.
69 FAIL The update files, load vintages, and translations are different
in both SPEs. The Standby SPE has the most current update
file, and the Active SPE has the most current translations.
70 FAIL The update files, load vintages, and translations are different
in both SPEs. The Standby SPE has the most current update
file and translations.
1. Follow the procedures for Error Code #4 to get the correct
load vintage. After running the test tape long command,
check for Error Code #32 or #64. Follow the recovery
procedure under the applicable error code.
72 FAIL The update files and announcements are different in both
SPEs. The Standby SPE has the most current update file and
the Active SPE has the most current announcements.
1. Issue the save announcements command to save
announcements on both SPEs.
2. Follow the procedures for Error Code #64.
73 FAIL The update files, translations, and announcements are
different in both SPEs. The Active SPE has the most current
translations and announcements, and the Standby SPE has
the most current update file.
74 FAIL The update files, translations, and announcements are
different in both SPEs. The Active SPE has the most current
announcements, and the Standby SPE has the most current
update file and translations.
1. Issue the save translations command.
2. Issue the save announcements command.
3. Follow the procedures for Error Code #64.
Table 10-607. TEST #421 Tape Data Consistency Check Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
