Maintenance Object Repair Procedures
555-233-123
10-1652 Issue 4 May 2002
84 FAIL The update files, load vintages, and announcements are
different in both SPEs. The Standby SPE has the most current
update file and announcements.
85 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Active SPE
has the most current translations, and the Standby SPE has
the most current update file and announcements.
86 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Standby SPE
has the most current update file, translations, and
announcements.
1. Follow the procedures for Error Code #4 to get the correct
load vintage. After running the test tape long command,
check for Error Code #32 or #64. Follow the recovery
procedure under the applicable error code.
PASS The load vintages, translations, announcements, and update
files are the same.
Table 10-607. TEST #421 Tape Data Consistency Check Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
