Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-4 Issue 4 May 2002
Output
The following example shows the output from the busyout board 1c07
command, and assumes that board in cabinet 1, carrier c, slot 7 is an analog
board with three administered ports. The responses display on a test-by-test basis
with one line of data for each test result.
Field descriptions
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk xxx/yyy (xxx = trunk group, yyy = member)
private CO line P/xxx (xxx = private CO line group number)
Result
Test result: Pass, Abort, or Fail
Error Code
Numeric code explaining why the release failed or aborted. Refer to
the detailed list of the codes by test number for each MO.
busyout board 01C07 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C07 ANL-BD PASS
01C0702 ANL-LINE PASS
01C0701 ANL-LINE 51001 PASS
01C0703 ANL-LINE PASS
Command successfully completed
To Next Page
Loading...
