Maintenance Object Repair Procedures
555-233-123
10-1992 Issue 4 May 2002
2000 ABORT Response to the test request was not received from the
VC-BD circuit pack within the allowable time period.
1. If this result occurs repeatedly, reset the circuit pack if the
other ports are not in use. Reset the circuit pack by
issuing the busyout board PCSS and the reset board
PCSS commands.
2. If this result occurs again, replace the circuit pack.
2012 ABORT Internal system error
2100 ABORT Could not allocate the necessary system resources to run this
test.
2103 ABORT The system could not make the conference connection for the
test.
1. Retry the command at 1-minute intervals a maximum of 5
times.
0 FAIL The TDM Loop Around Test failed.
1 FAIL The Conference Circuit Test failed.
1. Replace circuit pack.
PASS The VC Summer Port Local TDM Loopback Test passed.
Table 10-716. TEST #1100 VC Summer Port
Local TDM Loopback Test — Continued
Error
Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
