Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-78 Issue 4 May 2002
Input form
When you enter the display errors command, the system first displays the
options screen. Select the options you want to view on the report. The figure
below is an example of the options screen for an Error Report.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
display
errors
high
resolution
print
schedule
Highlights the time stamps on
the Error Report for the first and
last occurrences of the error.
Report sent to printer
Command is validated and then
a scheduling form displays to
schedule execution of the
command. The command is
then placed in the command
queue and is executed at the
specified time. The information
displayed by the command is
sent to the system printer
instead of the screen.
1
Examples:
display errors
display errors print
display errors schedule
display errors high-resolution
print
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
nms
browse
all errors
displayed
none
display errors Page 1 of 1
ERROR REPORT
The following options control which errors will be displayed.
ERROR TYPES
Error Type: _____ Error List: active-alarms
REPORT PERIOD
Interval: _ From: __/__/__:__ To: __/__/__:__
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Cabinet: __
Port Network: __
Board Number: ____
Port: ______
Category: ________
Extension: _____
Trunk ( group/member ): ___/___
To Next Page
Loading...
