Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-110 Issue 4 May 2002
Output
The following example shows the output for display synchronization.
Field descriptions
Stratum:
Synchronization stratum that is used (3 or 4)
Primary:
First choice system synchronization source (blank = no
synchronization); valid only if stratum 4 synchronization specified
Secondary:
Second choice system synchronization source (blank = no
synchronization); valid only if stratum 4 synchronization specified
Location:
Circuit pack location (cabinet-carrier-slot) of all administered DS1
circuit packs are listed here.
Name:
User-defined name administered for the DS1 circuit pack. Blank
means no user-defined name administered.
Slip:
If the DS1 circuit pack has slip alarm, field shows y; otherwise it
shows
n.
Port
Network:
Only valid for stratum 3 synchronization; specifies the port network
supplying synchronization through the tone clock circuit pack.
display synchronization Page 1 of 2
SYNCHRONIZATION SOURCE (DS1 circuit pack location)
Stratum: 4
Primary: Secondary:
DS1 CIRCUIT PACKS
Location Name Slip Location Name Slip
02B10 D92D1 ds1 2b10 n
02B11 d92D1 ds1 2b11 n
01C10 D92D1 ds1 1c10 n
01C11 D92D1 ds1 1c11 n
NOTE: TN722B DS1 sources result in stratum 4, type II synchronization
To Next Page
Loading...
