display test-schedule
Issue 4 May 2002
8-123555-233-123
Output
The following is the output from the display test-schedule n command.
Field descriptions
Schedule
The current schedule number.
Schedule
Time
The hour and minute that the test begins (24-hour time, with “00:00”
being midnight). This time must be greater than the current time.
Schedule
Date
Month (1 to 12), day (1 to 31), and year on which testing begins (default
is the system date). Must be equal to or greater than the current date.
Schedule
Test Days
A y next to the days of the week indicates the days of the week this test
runs.
Interval
The length of this schedule in weeks. If this field is 0, the schedule runs
on the specified days only once.
OTL
Throttle
The number of concurrent tests run within a schedule. This guarantees
that all trunk members within a schedule are tested serially or if multiple
trunk members are tested from the same schedule.
Page 1 of 1
ATMS TRUNK TEST SCHEDULE
Schedule No: __
Schedule Time: __:__ Schedule Test Days Interval: __
Schedule Date: __/__/__ SU: _ TU: _ TH: _ SA: _ Duration: __
OTL Throttle: _ MO: _ WE: _ FR: _ Test Type: ______
Trk Bgn End Trk Bgn End Trk Bgn End Trk Bgn End Trk Bgn End
Grp Mem Mem Grp Mem Mem Grp Mem Mem Grp Mem Mem Grp Mem Mem
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
To Next Page
Loading...
