list config software-version
Issue 4 May 2002
8-145555-233-123
The following shows the output from list configuration software-version.
Field descriptions, Page 1
Update File Section Displays information pertaining to software field-update
files or “patches.”
Creation (GMT)
Tape and (GMT)
Disk
When the update file was originally created, in Greenwich
Mean Time (GMT). Note that this is not the time at which
the update file was written to the MSS device.
Old-Version
Tape and Disk
The software version for which the update was created.
Old-Identifier
Tape and Disk
Which previous update file this update file expected to find
stored in the MSS when it was applied.
New-Identifier
Tape and Disk
Uniquely identifies the current update file.
Software Version
Section
Displays information related to the current software-load
module stored in memory and in the MSS.
Memory Resident
Version number of the RAM-resident load module.
Mem Card Resident
Version of memory card resident load module. If a memory
card is not installed, this field will display “no card”.
Update-identifier
(Patch Identifier)
This uniquely identifies the update file, if any, that has been
applied to memory.
Update-state (Patch
State)
The status of the software field-update (“patch”) file id is
displayed.
list configuration software-version Page 1
SOFTWARE VERSIONS
SPE-A SPE-B
UPDATE FILE
Creation (GMT) Date: 4:17 pm FRI NOV 3,1995 4:17 pm FRI NOV 3, 1995
Old Version Tape: G3V4i.03.0.044.0 G3V4i .03.0.044.0
Old Identifier Tape: none none
New Identifier Tape: 000010 000010
Update State: new update ready to be entirely applied
applied to memory
SOFTWARE VERSION
Memory Resident: G3V4i.03.0.044.0 G3V4i .03.0.044.0
Mem Card Resident: none none
Update Identifier: none 000010
TRANSLATION DATE
Memory Resident: 1:01 pm THU NOV 2, 1995
Mem Card Resident: 1:01 pm THU NOV 2, 1995
list config log applied patch to standby
press CANCEL to quit -- press NEXT PAGE to continue
To Next Page
Loading...
