Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-188 Issue 4 May 2002
0x50 - ASAI level 2 uplink primitive
R1:
Message[1] = Port Network Number of ASAI port
Message[2] = reserved
Message[3] = Carrier Address of ASAI port
Message[4] = Port number of ASAI port
Message[5] = SAPI
Message[6] = TEI
Message[7,8] = Link ID
Message[9] = Uplink encode
0x01 - ASAI Link State
0x02 - TEI Management Message
0x03 - XID Message
Message[10] = R1/R3 Link States:
0x00 - the link has gone down
0x01 - the link has come up
0x02 - the link id has changed
0x03 - the link has gone hyperactive
0x04 - the link has recovered
0x05 - the audit recovery stim
0x06 - the link has been reset
0x07 - link state hyper (too many SABMEs) disconnect
0x08 - broadcast link audit
= R1/R3 TEI Management Message
0x01 - Identity request
0x05 - Identity Check Response
0x07 - Identity Verify Request
= R1/R3 XID Messages
0x01 - XID Request
0x02 - XID Response
To Next Page
Loading...
