Avaya Definity SI - Page 454

Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-204 Issue 4 May 2002
Version 2:
Errors/Notifications:
R1/R3:
0x01 - no outgoing buffer available
0x05 - pvc session down
0x06 - pvc session up
0x07 - pvc session connect
0x08 - pvc session restart
0x09 - message buffer overload uplink
0x0A - message buffer overload downlink
0x0B - message buffer exhaustion
0x0C - max # of outgoing msgs allowed
0x0D - bad msg type in message buffer routine
0x0E - no message buffers available
0x0F - message buffer pointer error
0x10 - pm state table stimulus ignored
0x11 - bad session connect message
Session Layer Control
NOTE:
The session layer header is considered part of the session layer message.
0xB0 - X.25 outgoing session layer control
message
Message[1] = processor channel number
Message[2] = application error/notification
Message[3+] = pm stimulus ignored (For message[2] == 0x10 only)
Message[1] = processor channel number
Message[2] = session layer message type
Message[3] = buffer id
Message[4] = 0
Message[5+] = session layer message