list testcalls
Issue 4 May 2002
8-217555-233-123
Output
The following example is of the output for list testcalls detail grp 80.
Detail report field descriptions
Group
The trunk group number selected.
Type
The trunk group type.
Vendor
The vendor of this trunk group.
TTL Type
The kind of test line for this trunk group.
Threshold
Values
The list of marginal and unacceptable threshold values defined on the
trunk group form.
The following fields appear on the lower section of the form. Many of the
column headings contain the abbreviations “FE” for far end and “NE” for
near end. These abbreviations define which end took the measurements.
Trk Mem
The trunk member within the trunk group.
Test Date
The month and day this trunk was tested.
Test Time
The time of day this trunk was tested.
Tst Rslt
This field describes the results of the trunk transmission test.
1004Hz-loss
Min
Far-to-near and near-to-far measurements of 1004-Hz loss from low-level
tone.
1004Hz-loss
Max
Far-to-near and near-to-far measurements of 1004-Hz loss at 0 dBm.
list testcalls detail grp 80 Page 1 SPE A
ATMS MEASUREMENT REPORT
Group: 80 Type: co Vendor: TTL Type: 105-w-rl
THRESHOLD VALUES Loss dev at
1004Hz-loss 404Hz 2804Hz C-msg C-ntch SRL SRL
Min Max - + - + Noise Noise LO HI ERL
Marginal -2 21 9 9 9 9 55 74 0 0 0
Unacceptable -2 21 9 9 9 9 55 74 0 0 0
Trk Test Test Test -16dBm 0dBm
Mem Date Time Rslt NE FE NE FE NE FE NE FE NE FE NE FE NE FE NE FE NE FE
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
