status conference
Issue 4 May 2002
8-339555-233-123
Ts
The talking state of the endpoint - t, m, M, S, blank.
“t” = The endpoint detects voice energy (talking).
“m” = The endpoint indicates that it is muted to the MCU.
Endpoints may mute, but not send an indication to the MCU.
“M” = UDD/CRCS Agent interface mutes the endpoint’s audio. M
displays when both the endpoint and the UCC/CRCS Agent mute
the endpoint audio.
“S” = the solo-audio state set by UCC/CRCS Agent mutes the
endpoint’s audio. While in solo-audio state, new endpoints joining
the conference automatically mute.
“blank” = The endpoint does not detect voice energy (talking).
Vs
The MCU video state for this endpoint. a, b, B, c, i, r, R, s, S, u, U,
v, blank.
Quad-screen conferences = * appears before V values indicating
that an endpoint belongs to the mixed image. A
# appears before
the V values indicating that an endpoint belongs to the mixed
image (by administration or UCC/CRCS Agent). Instead, a Fill
video displays in its place. This occurs when an endpoint’s video
that is set in a quadrant cannot be used as a video source
because the endpoint is not connected to the conference,
suppresses its video, or has invalid video for its video source. Up
to four endpoints have an
* or # before the Vs field value.
Quad-screen conference in VAS mode = The mixed image
broadcasts to all endpoints. For quad-screen conference in
presentation mode, the mixed image is return video to the
presenter.
“a” = This value applies to quad-screen conferences. *a indicates
that an endpoint belongs to the current mixed image and is
administered to one of the quadrants.
*a indicates that the
endpoint is fixed in a quadrant, but is not currently connected (Fill
image displays).
“b” = For full-screen conferences, this endpoint’s video broadcasts
to other sites. This conference is in VAS, broadcast, or
presentation mode. For quad-screen VAS conference are prefixed
an asterisk indicating that this endpoint’s video is part of the mixed
image because of VAS. For quad-screen presentation
conferences,
b identifies the presenter as the broadcaster.
“B” = The UCC roll call feature causes the endpoint’s video to
broadcast to other sites. The UCC roll call feature performs in
full-screen mode.
“c” = This endpoint’s video broadcasts to other sites. The
conference was in chair mode and the chair designates the
broadcaster. Chair features perform in full-screen mode.
To Next Page
Loading...
