test ds1-loop
Issue 4 May 2002
8-431555-233-123
Feature Interactions
■ Loopback or span tests are not allowed on DS1 boards unless the board
has been busied out.
■ Only one of the CPE Loopback Jack, far-end CSU, one-way span, or
DS1/CSU loopback tests may be active at any given time on a DS1 span.
Output
The following example shows the output for test ds1-loop 1c07, and assumes
that the board in cabinet 1, carrier c, slot 7 is a TN767E DS1 board. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object
Alt. Name
The alternate means of identifying the maintenance object.
Test No
The test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, or Extra Bd
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of codes by test number for each MO.
test ds1-loop 01C07 ds1/csu-loopback-tests
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C07 DS1-BD 1209 PASS
01C07 DS1-BD 1210 PASS
01C07 DS1-BD 1211 PASS
Command Successfully Completed
To Next Page
Loading...
