test interface
Issue 4 May 2002
8-449555-233-123
Output
The following example shows the output for the test interface a1 command. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
Port address: cabinet-carrier-slot (the carrier associated with
the particular processor interface board)
Maintenance
Name
The name of maintenance object
Alt. Name
Blank.
Test No
The test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, or Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each MO.
test interface a1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A1 PI-SCI 231 PASS
01A1 PI-BD 52 PASS
Command Successfully Completed
To Next Page
Loading...
