Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-464 Issue 4 May 2002
Output
The following example shows the output from test network-control a. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
Port address: cabinet (always 1)-carrier-slot-circuit. For the
DATA-BD, SW-CTL, and CARD-MEM maintenance objects, the
slot and circuit fields of port address are blank. DATA-CHL
(administered data channel) uses
XX as the slot address and has
a circuit number between 01 and 04. The carrier field has a value
A for the control carrier A in a simplex system, and A or B for
control carriers A and B in a duplex system.
Maintenance
Name
The name of the maintenance object:
■ DATA-BD for Network Control board
■ SW-CTL for Switch Control Archangel
■ DATA-CHL for administered data channel
■ CARD-MEM for flash memory card on Network Control board
Alt. Name
Extension number of the DATA-CHL, if administered. Otherwise,
blank.
Test No
The test being executed.
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of codes by test number for each MO.
test network-control a
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A DATA-BD 52 PASS
01AXX01 DATA-CHL 4001 109 PASS
01AXX01 DATA-CHL 4001 110 PASS
01AXX01 DATA-CHL 4001 111 PASS
01A SW-CTL 95 PASS
01A SW-CTL 92 PASS
01A SW-CTL 94 PASS
01A SW-CTL 324 PASS
01A CARD-MEM 695 PASS
01A CARD-MEM 696 PASS
01A CARD-MEM 697 PASS
01A CARD-MEM 698 PASS
01A CARD-MEM 699 PASS
Command Successfully Completed
To Next Page
Loading...
