Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-466 Issue 4 May 2002
Output
The following example is the screen output for the test packet-control 1B long
command. Note that carrier B is the active carrier in this example.
Field descriptions
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object.
Alt. Name
Not applicable
Test No.
The test number run on the packet-control.
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each MO.
test packet-control 1B l
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01B PKT-CTRL 583 PASS
01B PKT-CTRL 584 PASS
01B PKT-CTRL 585 PASS
Command successfully completed
To Next Page
Loading...
