Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-478 Issue 4 May 2002
Output
The following output example is for the test shadow-link command. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
Port
The port address is always blank.
Maintenance
Name
SHDW-LNK
Alt. Name
Not applicable.
Test No
The test number is always 318.
Result
Test result: Pass, Abort, Fail, Disabled
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the list of codes by test number for each MO.
test shadow-link
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
SHDW-LNK 318 PASS
Command Successfully Completed
To Next Page
Loading...
