Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-490 Issue 4 May 2002
Output
The following screen is an example of the output for the test tdm port-network 1
command. The responses display on a test-by-test basis with one line of data for
each test result.
Field descriptions
Port
For TDM-BUS maintenance object the port network number
and the bus (A or B) is displayed.
Maintenance
Name
Maintenance object name
Alt. Name
Not applicable.
Test No
Test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the list of codes by test number for each MO.
test tdm port-network 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
PN 01A TDM-BUS 294 PASS
PN 01A TDM-BUS 296 PASS
PN 01A TDM-BUS 297 PASS
PN 01B TDM-BUS 294 PASS
PN 01B TDM-BUS 296 PASS
PN 01B TDM-BUS 297 PASS
Command Successfully Completed
To Next Page
Loading...
