Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-494 Issue 4 May 2002
Output
The responses display on a test-by-test basis with one line of data for each test
result. The following screen is an example of the output for the test trunk 78
command.
Field descriptions
Port
The port address: cabinet-carrier-slot-circuit
Maintenance
Name
The name of maintenance object being tested.
Alt. Name
The alternate means of identifying the maintenance object. If
the object is a trunk, the field contains
xxx/yyy (where xxx
= trunk group number, yyy = member number). If the object
is a private CO line, the field contains P/xxx (where xxx =
private CO line group number).
Test No
The test number being executed
Result
The result of the individual test: PASS, ABORT, FAIL, NO
BOARD, DISABLED, and EXTRA BD.
Error Code
A system-generated number indicating the reason that the
test for the named MO failed or aborted.
test trunk 78
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C1505 CO-TRK 078/001 3 PASS
01C1505 CO-TRK 078/001 36 PASS
Command Successfully Completed
To Next Page
Loading...
