Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-132
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show interface
fc1/7 1 auto on down -- -- --
fc1/8 1 auto on fcotAbsent -- -- --
fc1/9 1 auto on fcotAbsent -- -- --
fc1/10 1 auto on fcotAbsent -- -- --
fc1/11 1 auto on down -- -- --
fc1/12 1 auto on fcotAbsent -- -- --
fc1/13 1 auto on down -- -- --
fc1/14 1 auto on fcotAbsent -- -- --
fc1/15 1 auto on down -- -- --
fc1/16 1 auto on fcotAbsent -- -- --
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
sup-fc0 up -- 1 Gbps 2596
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
mgmt0 up 173.95.112/24 100 Mbps 1500
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
vsan1 up 10.1.1.1/24 1 Gbps 1500
The following example shows how to display counter information for a FCIP interface.
switch# show interface fcip 3 counters
fcip3
TCP Connection Information
2 Active TCP connections
Control connection: Local 43.1.1.2:3225, Remote 43.1.1.1:65532
Data connection: Local 43.1.1.2:3225, Remote 43.1.1.1:65534
30 Attempts for active connections, 0 close of connections
TCP Parameters
Path MTU 1500 bytes
Current retransmission timeout is 300 ms
Round trip time: Smoothed 10 ms, Variance: 5
Advertised window: Current: 122 KB, Maximum: 122 KB, Scale: 1
Peer receive window: Current: 114 KB, Maximum: 114 KB, Scale: 1
Congestion window: Current: 2 KB, Slow start threshold: 1048560 KB
5 minutes input rate 64 bits/sec, 8 bytes/sec, 0 frames/sec
5 minutes output rate 64 bits/sec, 8 bytes/sec, 0 frames/sec
910 frames input, 84652 bytes
910 Class F frames input, 84652 bytes
0 Class 2/3 frames input, 0 bytes
0 Error frames timestamp error 0
908 frames output, 84096 bytes
908 Class F frames output, 84096 bytes
0 Class 2/3 frames output, 0 bytes
0 Error frames 0 reass frames
The following example shows how to display counter information for all interfaces.
switch# show interface counters brief
-------------------------------------------------------------------------------
Interface Input (rate is 5 min avg) Output (rate is 5 min avg)
----------------------------- -----------------------------
Rate Total Rate Total
MB/s Frames MB/s Frames
-------------------------------------------------------------------------------
fc9/1 0 0 0 0
fc9/2 0 0 0 0
fc9/3 0 0 0 0
fc9/4 0 0 0 0

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available