Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
22-241
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show module
The following example uses the show module, show port index-allocation, and show module
recovery-steps commands to display a Generation 1 module that is powered down because of a lack of
indices between 0 and 255.
switch# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ ------------
1 48 1/2/4 Gbps FC Module DS-X9148 ok
2 48 1/2/4 Gbps FC Module DS-X9148 ok
3 48 1/2/4 Gbps FC Module DS-X9148 ok
4 48 1/2/4 Gbps FC Module DS-X9148 ok
5 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
6 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
7 48 1/2/4 Gbps FC Module DS-X9148 ok
8 24 1/2/4 Gbps FC Module DS-X9124 ok
9 32 1/2 Gbps FC Module powered-dn
Mod Power-Status Power Down Reason
--- ------------ ---------------------------
9 powered-dn Insufficient resources (dest Index)
switch# show port index-allocation
Module index distribution:
------------------------------------------------------+
Slot | Allowed | Alloted indices info |
| range | Total | Index values |
-----|---------|-------|------------------------------|
1 | 0-1023| 48 | 160-207 |
2 | 0-1023| 48 | 3-50 |
3 | 0-1023| 48 | 0-2,208-252 |
4 | 0-1023| 48 | 51-98 |
7 | 0-1023| 48 | 99-146 |
8 | 0-1023| 24 | 147-159,256-266 |
9 | ----- | - | (None) |
SUP | 253-255 | 3 | 253-255 |
switch# show module 9 recovery-steps
Failure Reason:
Insufficient indices in range 0-255. Module cannot be powered up
The following example uses the show module, show port index-allocation, and show module
recovery-steps commands to display a Generation 1 module that is powered down due to
non-availability of contiguous indices.
switch# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ------------------ --
1 48 1/2/4 Gbps FC Module powered-dn
3 12 1/2/4 Gbps FC Module DS-X9112 ok
4 8 IP Storage Services Module powered-dn
5 48 1/2/4 Gbps FC Module DS-X9148 ok
6 48 1/2/4 Gbps FC Module DS-X9148 ok
7 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
8 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
9 24 1/2/4 Gbps FC Module DS-X9124 ok
11 4 10 Gbps FC Module DS-X9704 ok
12 48 1/2/4 Gbps FC Module DS-X9148 ok
13 16 1/2 Gbps FC Module DS-X9016 ok
Mod Power-Status Power Down Reason
--- ------------ ---------------------------
1 powered-dn Config down

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available