Cisco MDS 9000 Series Command Reference

Send documentation comments to mdsfeedback-doc@cisco.com
xlv
Cisco MDS 9000 Family Command Reference
OL-8413-07, Cisco MDS SAN-OS Release 3.x
New and Changed Information
iscsi dynamic initiator command
islb abort command
islb commit command
islb distribute command
islb initiator command
islb save-initiator command
islb virtual-target name command
islb vrrp command
islb zoneset activate command
I Commands
member (zone configuration and
zoneset-zone configuration submode)
command (ipv6 argument)
metric (iSLB initiator configuration)
command
mutual-chap username (iSCSI initiator
configuration and iSLB initiator
configuration) command (added iSLB initiator
configuration submode)
M Commands
show islb cfs-session status command
show islb initiator command
show islb merge status command
show islb pending command
show islb pending-diff command
show islb session command
show islb status command
show islb virtual-target command
show islb vrrp command
Show Commands
static (iSCSI initiator configuration and
iSLB initiator configuration) command
(added iSLB initiator configuration submode)
S Commands
target (iSLB initiator configuration)
command
T Commands
username (iSCSI initiator configuration
and iSLB initiator configuration) command
(added iSLB initiator configuration submode)
U Commands
vsan (iSCSI initiator configuration and
iSLB initiator configuration) command
(added iSLB initiator configuration submode)
V Commands
zonename (iSLB initiator configuration)
command
Z Commands
Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available