SHOP MANUAL
Engine
Ch 1 page 14
Disconnect the hose from the termostat housing and
the pipe between the air cooler and engine air inlet.
Disconnect bracket for the air pipe and bracket between engine
and fan bracket
Disconnect the outlet pipe bend from turbo, and the inlet water
hose from the transmission cooler.
Disconnect the retur hose. (Engine - expansion tank)
(Quick release coupling)
(Front of the engine, view from the right hand side)
Disconnect the urea venting filter from cooling fan.
Figure 15
Figure 14
Figure 13
Figure 12
Applies only to serial number 8X0635 - up.
NOTE
To Next Page
Loading...