CDHD Variables and Commands
VarCom Reference Manual 113
GEARINMODE
Definition Gearing Input Interpolation
Type Variable (R/W)
Description Used for gearing that is fed through the Controller I/F
connector only. Enables interpolation of the gearing signal
and increase of resolution by a factor of 16.
Syntax Read: GEARIN
Write: GEARIN <value>
Firmware 1.0.6
Drive status Disabled
Range 0 = Gearing input interpolation not activated
1 = Gearing input interpolation activated
Default value 0
Unit Not Applicable
Non-volatile Yes
See also GEARMODE
HWPEXT
To Next Page
Loading...
