CDHD Variables and Commands
VarCom Reference Manual 129
HIFACEREAD
Definition HIPERFACE Generic Command
Type Command
Description Not intended for user unless instructed by Technical
Support.
Sends a query or instruction to the HIPERFACE encoder. The
command parameters must be entered according to the
HIPERFACE communication standards. Information from the
encoder is received and printed in the order received, and
includes address, command, additional data (if any), and
checksum.
Syntax HIFACEREAD
Firmware 1.2.12
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile Not Applicable
See also
To Next Page
Loading...
