CDHD Variables and Commands
VarCom Reference Manual 297
OUTILVL2
Definition Position Level 2 for Digital Output Definition
Type Variable (R/W)
Description Gets/sets the second current level used for a condition that
controls a digital output.
Syntax Read: OUTILVL2
Write: OUTILVL2<value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 to 150
Default value 0
Unit A
Non-volatile Yes
See also OUTILVL1
OUTINV
OUTMODE
OUTPUTS
CANopen 209Ah, sub-index 0
To Next Page
Loading...
